Equipment Capabilities

Steel Plate Cutting

  • Koike Plasma / Oxy-Fuel with 10’ x 40’ Water Table. Plasma cuts up to 2” thick, equipped with true hole technology
  • Kodiak Heavy Duty Oxy-Fuel with 10′ x 40′ Water Table
    Flame cuts up to 10” thick
  • Burny 5 Oxy-Fuel with 8’ x 40’ Water Table
    Flame cuts up to 10” thick

Stress Relieving and Annealing

  • Car Bottom Stress Relieving and Annealing Oven
  • Computer controlled 1,000,000 BTU, 8’ width x 8′ height x 14’ length, 40,000 lbs. capacity

Straightening Press

  • 250 Ton Vertical Ram Straightening Press
  • 60” wide x 200” long bed

Saws

  • Katso 360/660 Plate Saw 26″ width x 161″ length x 12″ height
  • Amada H1080 Plate Saw 48″ width x 33″ height
  • Marvel Series 8 Bandsaw 20″ width x 14″ height
  • Cosen Bandsaw 26″ width x 16″ height

Blanchard Style Grinding

  • Mattison 400S Vertical Spindle 415HP 48” width x 200” length
  • Mattison 400S Vertical Spindle 150HP 36” width x 170” length
  • Mattison 400S Vertical Spindle 100HP 36” width x 100” length
  • Blanchard 54-100 Rotary Two 250HP 128” diameter x 45” height
  • Blanchard 32-60 Rotary Three 100HP 62” diameter x 36” height
  • Mattison Rotary 125HP 72” diameter x 36” height
  • Mattison Rotary 125HP 104” diameter x 30” height
  • Blanchard Rotary 50HP 42” diameter x 18” height

Surface Grinding

  • Mattison Horizontal Spindle 50HP 36” width x 168” length x 31” height
  • Mattison Horizontal Spindle CNC 30HP 37” width x 198” length x 31” height
  • Mattison Horizontal Spindle 30HP 30” width x 96” length x 30” height
  • Mattison Horizontal Spindle 30HP 14” width x 96” length x 24” height

CNC Machining

  • Johnford Vertical, 162″ X-axis x 109″ Y-axis x 42″ Z-axis
  • Doosan DBM 2540, 167″ X-axis x 98.5″ Y-axis x 35.1″ Z-axis
  • Takumi DCM 3020 Vertical, 122″ X-axis x 78″ Y-axis x 31″ Z-axis
  • Yama Seiki Vertical, 78″ X-axis x 47″ Y-axis x 31″ Z-axis
  • (2) Yama Seiki Vertical, 63″ X-axis x 31″ Y-axis x 31″ Z-axis
  • Yama Seiki Lathe, 18.1″ swing x 110″ long, w/ live tooling

Manual Machining

  • G & L Horizontal Boring Mills 83” width x 134” length (2)
  • Radial Arm Drills (2)
  • Universal Mills (2)
  • Flex Arm Tapping Machines (2)

Inspection Department

  • Full time staff
  • 3,000 sq. ft. Inspection Department
  • Independent from shop

Full Service Fab Shop

  • Certified welders
  • 15,000 sq. ft. for assembly and machine building
  • Painting

REQUEST A QUOTE